Optional with Taiwanmilling head:
(1). Step pully head IK-5SA(Ф105mm) Speed 70～3500 (10 steps) or 76～6980 (20 steps) Spindle travel6”(150mm) (5HP) Feeds 0.076,0.038,0.203
(2). Step pully head IK-6SB2-2#(Ф110mm) Speed 70～3500 (10 steps) Spindle travel5.5”(140mm) (6HP) Feeds 0.076,0.038,0.203
(3). Variable speed head IK-5VS(Ф105mm) Speeds: 70～3600rpm (5HP) Spindle travel:5”(127mm)
(4). Frequency head IK-6FS2-2#(Ф110mm) 0～5000rpm (6HP)
Note: TM-320 table with different servo motors : X axis or X/Y/Z axes.
Order No.
3-66-10
3-66-20
3-66-30
3-66-40
MODEL
Unit
TM-320
TM-320A
TM-360A
Spindle taper
ISO40
ISO40
ISO40(V), ISO50(H)
Spindle travel
mm
127
150
140
Spindle quill feed speeds
mm/rev
0.04，0.08，0.15
0.04，0.08，0.15
0.04，0.08，0.15
Spindle speeds
Vertical (Step pulley)
rpm
65～4660 (16 steps)
80～5440 (16 steps)
80～5440 (16 steps)
Vertical (Variable)
rpm
60～4200
80～5400
80～5400
Horizontal
rpm
45～980 (6 steps)
60～1350 (12 steps)
60～1800 (12 steps)
Distance from vertical spindle to column
mm
480
200～600
150～550
Distance from spindle to table
mm
155～455(V);
20～410(H)
155～455(V);
0～300(H)
135～485(V);
0～350(H)
Distance from horizontal spindle to ram
mm
183
190
230
Table size
mm
1325x320
1600x320
1250x320
1250x360
Table travel
mm
1100/1300x420x420
800x300x300
1000x300x350
Table feeds
mm/min
X:0～3500 (or X: 30～750
Y: 20～500 Z:15～375)
X,Y: 15～370
(Rapid:540) Z:560
X,Y:15～370 (Rapid:540)
Z:560
T-slot (No./Width/Distance)
mm
3-16-63
3-14-70
3-18-80
Main motor power
KW
3.75(V); 2.25(H)
3.75(V); 2.25(H)
3.75(V); 4(H)
Overall dimensions
mm
1820x1520x2270
1820x1800x2270
1820x1520x2270
2220x1790x2360
N.W./G.W.
kg
1900/2100, 1950/2150
1850/2050
2500/2700
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
©Copyright 2011-2014 Cogentech International Ltd All right reserved 
Tel:+86-532-85979312 Fax : +86-532-85979318 E-mail : 85979318@163.com
