Cogentech International Ltd All right reserved

Home >> Product

Order No.	MODEL	Useful length(mm)	Without pre-bending (mm)	With pre-bending thickness(mm)	Central rolls dia.(mm)	Side rolls Dia. (mm)	Working speed (m/min)	Motor power (KW)
8-23-00	RBM-1508A	1500	8	6	200	170	4	5.5
8-23-01	RBM-2008A	2000	8	6	210	180	4	7.5
8-23-02	RBM-2012A	2000	12	10	245	200	4	11
8-23-03	RBM-2512A	2500	12	10	265	220	4	11
8-23-04	RBM-2016A	2000	16	12	250	210	4	15
8-23-05	RBM-2516A	2500	16	12	300	240	4	15
8-23-06	RBM-2020A	2000	20	16	300	250	4	18.5
8-23-07	RBM-2520A	2500	20	16	350	280	4	18.5
8-23-08	RBM-2530A	2500	30	24	410	340	4	22
8-23-09	RBM-3030A	3000	30	24	450	380	4	30
8-23-10	RBM-2540A	2500	10	32	500	420	4	37
8-23-11	RBM-3040A	3000	10	32	540	440	4	45
8-23-12	RBM-2550A	2500	50	40	560	450	4	45
8-23-13	RBM-3050A	3000	50	40	600	480	4	55
8-23-14	RBM-2560A	2500	60	48	610	500	4	55
8-23-15	RBM-3060A	3000	60	48	650	520	4	75

Features:

1. Rollers are made by fine steel forging, heat treatment.

2. Suitable in rolling the plate into entire tube or the circular arc as well as certain scope cone.

3. The upper roller is leading roller, driven by hydraulic motor.

4. The lower roller may take the vertical movement, impelled through the hydraulic piston, easy for clamping plate.

5. The two-side rollers can work separately, promoting efficiency.

6. Tip over device makes the unload of workpiece easily.

7. Moveable controlling table is easy for operation.

8. PLC control, overload protect.